iceball Skrevet 17. januar 2018 Skrevet 17. januar 2018 56 minutter siden, Moskus skrev: Godt spørsmål, jeg har ikke testet. .hex-filer som er nødvendig er ikke tilgjengelig fra Aeotec. Av det jeg har sett så er det vel bare Philio av de mer "normale" merkene her til lands som har dette tilgjengelig. Siter
hkmod25 Skrevet 18. januar 2018 Skrevet 18. januar 2018 POPP leverer både .hex og .bin FirmWare filer. For Philio produkter har jeg aldri sett/hørt/lest at det eksist. beh. for å oppdatere noe... 1 Siter
Moskus Skrevet 18. januar 2018 Skrevet 18. januar 2018 Akkurat nå, hkmod25 skrev: For Philio produkter har jeg aldri sett/hørt/lest at det eksist. beh. for å oppdatere noe... ... men det er jo bra hvis det er mulig, likevel. Siter
Dennis87 Skrevet 18. januar 2018 Skrevet 18. januar 2018 Aeotec oppdateres man med å bruke Z-stick. Bruker selv Z-stick i en Pi3 med Hassio så tar den bare ut og kobler i pcen å oppdaterer. Oppdaterte akkurat 2 smart dimmer 6 og 3 Multisensor 6 som har fått en god del forbedringer/fiks i siste fw update. Var gjort på ca 10-15 min. Siter
Moskus Skrevet 18. januar 2018 Skrevet 18. januar 2018 Men det krever dessverre en Z-stick. Billigere enn en Fibaro HC, men likevel samme problemstilling. Siter
Erik G Skrevet 18. januar 2018 Skrevet 18. januar 2018 Aeotec kan du bruke de fleste Z-wave USB stikkene fra Windows. Fungerte helt fint med UZB1. Siter
Moskus Skrevet 19. januar 2018 Skrevet 19. januar 2018 9 timer siden, Erik G skrev: Aeotec kan du bruke de fleste Z-wave USB stikkene fra Windows. Fungerte helt fint med UZB1. Det var i det minste en oppgradering. Men vanskeligere med Z-NET. Må vel til med en secondary controller i så fall. Siter
Erik G Skrevet 21. januar 2018 Skrevet 21. januar 2018 På 19.1.2018 den 9.22, Moskus skrev: Det var i det minste en oppgradering. Men vanskeligere med Z-NET. Må vel til med en secondary controller i så fall. Den har støtte for IP også, vet ikke om det kan fungere. Siter
Nettopp Skrevet 12. oktober 2018 Skrevet 12. oktober 2018 Hvis det er noen som har en Fibaro-hub som de ønsker å låne/leie ut i Oslo-området, så er jeg interessert i å få oppdatert firmware. Der er forøvrig mulig å oppdatere Aeotec Multisensor 6 "OTA" med tredjeparts-hub nå etter at Aeotec har lagt ut filene: https://aeotec.freshdesk.com/support/solutions/articles/6000205600-update-multisensor-6-firmware-via-homeseer- 3 Siter
Moskus Skrevet 12. oktober 2018 Skrevet 12. oktober 2018 2 timer siden, Nettopp skrev: Der er forøvrig mulig å oppdatere Aeotec Multisensor 6 "OTA" med tredjeparts-hub nå etter at Aeotec har lagt ut filene: https://aeotec.freshdesk.com/support/solutions/articles/6000205600-update-multisensor-6-firmware-via-homeseer- YAY! Verden går mot et bedre sted. 1 Siter
Tinge76 Skrevet 9. mars 2020 Skrevet 9. mars 2020 (endret) På 11.7.2017 den 7.00, ZoRaC skrev: Assosiasjoner og parametere må settes på nytt. Testet metoden over. Men homeseer viser fortsatt gammel FW (3.4) selvom HC Lite viste ver 3.5. Får heller ikke vist assosiasjoner. (Er grået ut). Settings viser ikke noe, bare tomme linjer. Men en kan dog justere lysstyrken som før... Kjører siste versjon av HC3 (3.0.0.548) Zwave 3.0.2.0 Kjørte en rescan: mar-10 09:41:24 Z-Wave ApplicationCommandHandler from Network: E26A9939 Node: 42 HANDLING: COMMAND_CLASS_BASIC_V2 Frame(7)=3 mar-10 09:41:09 Z-Wave Error Cannot get additional details about node 11 as there is no node information available. mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SCENE_ACTIVATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MARK mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_APPLICATION_STATUS mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SWITCH_ALL mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_NOTIFICATION_V6 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_PROTECTION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MULTI_CHANNEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MULTI_INSTANCE_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_METER_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SENSOR_MULTILEVEL_V8 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_CONFIGURATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_CRC_16_ENCAP mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_FIRMWARE_UPDATE_MD mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SECURITY mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_POWERLEVEL mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_DEVICE_RESET_LOCALLY mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SWITCH_MULTILEVEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_VERSION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_BASIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_ZWAVEPLUS_INFO mar-10 09:41:09 Z-Wave uzb1: Node 11 is reporting 22 command classes in the node information. mar-10 09:41:09 Z-Wave uzb1: Node 11 controls class: COMMAND_CLASS_SCENE_ACTIVATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MARK mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_APPLICATION_STATUS mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SWITCH_ALL mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_NOTIFICATION_V6 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_PROTECTION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MULTI_CHANNEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MULTI_INSTANCE_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_METER_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SENSOR_MULTILEVEL_V8 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_CONFIGURATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_CRC_16_ENCAP mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_FIRMWARE_UPDATE_MD mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SECURITY mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_POWERLEVEL mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_DEVICE_RESET_LOCALLY mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SWITCH_MULTILEVEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_VERSION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_BASIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_ZWAVEPLUS_INFO mar-10 09:41:09 Z-Wave Node info frame from node 11 mar-10 09:41:09 Z-Wave uzb1: Contacting node 11 to get supported features mar-10 09:41:09 Z-Wave uzb1: Sending to node 11 (UnSecured) CC=COMMAND_CLASS_NO_OPERATION mar-10 09:41:09 Z-Wave Checking if we can reach node 11 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SCENE_ACTIVATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MARK mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_APPLICATION_STATUS mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SWITCH_ALL mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_NOTIFICATION_V6 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_PROTECTION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MULTI_CHANNEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MULTI_INSTANCE_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_METER_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SENSOR_MULTILEVEL_V8 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_CONFIGURATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_CRC_16_ENCAP mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_FIRMWARE_UPDATE_MD mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SECURITY mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_POWERLEVEL mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_DEVICE_RESET_LOCALLY mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_SWITCH_MULTILEVEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_VERSION mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_BASIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 CONTROLS class: COMMAND_CLASS_ZWAVEPLUS_INFO mar-10 09:41:09 Z-Wave uzb1: Node 11 is reporting 22 command classes in the node information. mar-10 09:41:09 Z-Wave uzb1: Node 11 controls class: COMMAND_CLASS_SCENE_ACTIVATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MARK mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_APPLICATION_STATUS mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SWITCH_ALL mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_NOTIFICATION_V6 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_PROTECTION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MULTI_CHANNEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MULTI_INSTANCE_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_METER_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SENSOR_MULTILEVEL_V8 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_CONFIGURATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_CRC_16_ENCAP mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_FIRMWARE_UPDATE_MD mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SECURITY mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_POWERLEVEL mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_ASSOCIATION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_DEVICE_RESET_LOCALLY mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_SWITCH_MULTILEVEL_V3 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_VERSION mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_BASIC_V2 mar-10 09:41:09 Z-Wave uzb1: Node 11 supports class: COMMAND_CLASS_ZWAVEPLUS_INFO mar-10 09:41:09 Z-Wave Node info frame from node 11 mar-10 09:41:09 Z-Wave uzb1: Contacting node 11 to get supported features mar-10 09:41:09 Z-Wave uzb1: Sending to node 11 (UnSecured) CC=COMMAND_CLASS_NO_OPERATION mar-10 09:41:09 Z-Wave Checking if we can reach node 11 mar-10 09:41:09 Z-Wave Getting class information for node 11... mar-10 09:41:09 Z-Wave Device synchronization needs to get Z-Wave class information for one node. mar-10 09:41:09 Z-Wave Syncing Z-Wave nodes with device list... Sent fra min SM-G960F via Tapatalk Endret 10. mars 2020 av Tinge76 Elendig logg fra mobilen... Siter
Moskus Skrevet 10. mars 2020 Skrevet 10. mars 2020 9 timer siden, Tinge76 skrev: Kjørte en rescan: Det var nærmest umulig å lese den loggen der, men det kan uansett virke som om vi nærmer oss punktet der exclude og re-include er mest fornuftig... Siter
Tinge76 Skrevet 10. mars 2020 Skrevet 10. mars 2020 (endret) 13 minutter siden, Moskus skrev: Det var nærmest umulig å lese den loggen der, men det kan uansett virke som om vi nærmer oss punktet der exclude og re-include er mest fornuftig... litt bedre logg denne gang... ikke så bra med klipp og lim fra mobilen... Endret 10. mars 2020 av Tinge76 Siter
Anbefalte innlegg
Bli med i samtalen
Du kan publisere innhold nå og registrere deg senere. Hvis du har en konto, logg inn nå for å poste med kontoen din.