Ny firmware til RFLink Gateway

[Hr Kotelett]

Da var firmware versjon 42 lansert til RFLink Gateway

 

R42: 
- New Device: Mi-Light/LimitlessLED/Applamp/Easybulb 2 way bridge functionality (2.4 Ghz, NRF24L01 with Milight wiring required) 
- New Device: Hama SD-UN5-RF switch set 
- New Device: Acurite Tower sensors 
- New Device: Pollin PFR-130 Temperature & Rain meter 
- New Device: Gaposa Blind/Shutter control (a.o. model QCT3S) 
- New Device: Byron BY35 / BY301 
- Added: Command "echo" function to auto create devices without the need of remote controls 
- Added: Command "rtsrecclean 9" function to clean a single rolling code table entry 
- Added: Command to invert the ON/OFF handling of the Tristate protocol 
- Fixed: improved Atlantic MD-210R detection 
- Fixed: improved DKW2012 detection to cover variations of the signal 
- Fixed: Smarthome YC-4000B detection 
- Fixed: improved RTS packet detection to prevent false positives 
- Fixed: improved FA500 packet detection to prevent false positives 
- Fixed: Modified X10 security sensor packet detection 
- Fixed: Modified maximum humidity limit 
- Fixed: Improved signal ARC detection 
- Fixed: Chacon EMW200 detection 
- Fixed: Nexa WST-512 detection 
- Fixed: Oregon UV800 
- Fixed: CM113 ID 
- Added: Support for another MiLight remote variant 

the download is available via our blog.
http://www.nemcon.nl/blog2

 

 

Skal bli artig å få prøvd MiLight funksjonen, typisk at jeg kjøpte meg en wifi controller igår da ^^ Men nå har jeg heller ikke fått 2,4 ghz kit'et jeg bestilte fra Ebay så vi får se hva som kommer først.

[Hr Kotelett]

R43 Lansert til RFLink Gateway

 

R43: (23/9/2016)
- New Device: MiLight WW/CW remote & Bulbs
- New Device: WH3 temperature sensors
- New Device: Alecto 1300 Wireless Plant Monitor
- New Device: Unitec W235 Climate sensor
- New Device: Jula / Marquant 943134 temperature sensor
- New Device: Inovalley SM200
- New Device: DC250 motor controller
- New Device: Maplin Weather Station N96GY, Fine Offset WH1080, Fine Offset WH1081, Watson W-8681,
Digitech XC0348 Weather Station, PCE-FWS 20, Elecsa AstroTouch 6975, Froggit WH1080
- New Device: Loh Electronics 02812 Temperature and Humidity sensor
- New Device: Excelvan weather station
- New Device: Master Electrician RC-012-1-TR-009
- New Device: Home Confort STHI 100 temperature/humidity sensor
- New Device: Ditec Garage Door remote control
- New Device: Acurite 609TXC (alternative protocol)
- New Device: WS7000-27, WS7000-28 Thermometer
- New Device: WS7000-25 Thermo/Humidity, WS7000-22 Thermo/Humidity
- New Device: WS7000-19 Brightness Luxmeter
- New Device: Holtek HT6P20 (and compatible) Door, Window and PIR sensors (Thanks: Douglas Gazineu)
- New Device: Ambient Weather / Frogit F007TH
- New Device: Ambient Weather / Frogit F007T
- New Device: Ambient Weather / Frogit F007PF
- New Device: SelectPower switchset
- New Device: Profile led dasegno
- New Device: KERUI D026 Door Window Sensor
- New Device: LaCrosse TXT141-BV2
- New Device: Baldr B0317
- New Device: Atlantic MC-335 PIR
- New Device: RTS sensor protocol / Soliris
- New Device: RTS Extended protocol / Eolis 3D
- Fixed: Removed slash (/) from device names
- Fixed: Removed RTS and other debug data
- Fixed: Avidsen switch issue
- Fixed: Avidsen temperature data detection
- Fixed: Blyss & Avidsen pairing working correctly
- Fixed: AB440R signal detection
- Fixed: Chuango signal detection
- Fixed: Improved Promax detection
- Fixed: Additional check to make sure Milight send is not used when Milight support is disabled
- Fixed: WS2500-19 now correctly reporting Lux value
- Fixed: Milight RGBW Remote and WW/CW (Dual) Remote Control operating simultaneously with RGBW
- Fixed: Livolo On/Off state
- Fixed: Brel timing
- Fixed: Novatys detection
- Fixed: AMST606 detection issues
- Fixed: SelectRemote doorbell retransmission
- Fixed: Byron SX doorbell retransmissions
- Fixed: Byron SX doorbell recognition
- Fixed: Further improved the RF Environment Optimization System
- Fixed: improved the detection of Acurite devices
- Fixed: improved the detection of Cresta devices
- Fixed: improved the detection of Atlantic devices
- Added: NRF24L01 hardware detection, activating MiLight without NRF will result in MiLight being disabled
- Added: Smarthome YC-4000B protocol variant
- Added: New Brel protocol version
- Added: WS7000 protocol variant

 

Lastes ned her: http://www.nemcon.nl/blog2/download

[Hr Kotelett]

RFLink Gateway versjon 44 lansert.

 

 

Brand new RFLink Gateway firmware adds support for Ikea Ansluta, Philips Living Colors Gen1, MySensors devices and has "Mini" GPIO. 
For Ansluta or Living Colors you will need a CC2500 module. Details on how to connect these modules are on the Wiring details page. 

Changelog: 
R44: 
- New Device: Ikea Ansluta (2.4 Ghz device, CC2500 transceiver required) 
- New Device: Philips Living Colors Generation 1 (2.4 Ghz device, CC2500 transceiver required) 
- New Device: Friedland DC44 
- New Device: Warema EWFS shutters and awnings 
- New Device: Bosch DID09T951, Bosch DID09T950 and compatible ventilation units 
- New Device: Siemens SF-01 and compatible ventilation units 
- New Device: Wave Design SF-01 and compatible ventilation units 
- New Device: Visonic MCT-302 open and close signal 
- New Device: Ningbo KD-205-1 switch set 
- New Device: Steffen Power Switch (1204380 3M) 
- New Device: Bresser weather sensor 
- New Device: RFTech 210TX weather sensor 
- New Feature: Bluetooth LE Advertisement packet sniffing *experimental* (NRF24L01 required, needs to be wired for MiLight) 
- New Feature: MySensors packet sniffing *experimental* (NRF24L01 required, needs to be wired for MiLight) 
- New Device: MySensors temperature and humidity devices (more types to follow) (NRF24L01 required, needs to be wired for MiLight) 
- Fixed: Improved OWL CM130 recognition 
- Fixed: Revolt power reporting corrected 
- Fixed: RFmeter values presented in hexadecimal 
- Fixed: Improved Baldr signal recognition 
- Added: Friedland PIR checksum calculation 
- Added: GPIO 4 input and 4 output pins can be used as on/off or push button devices

[Lazarus]

Den 6/9/2016 klokken 19.53, Hr Kotelett skrev:

Men nå har jeg heller ikke fått 2,4 ghz kit'et jeg bestilte fra Ebay så vi får se hva som kommer først.

Litt lenge siden men, Link? ?

[Hr Kotelett]

http://www.ebay.com/itm/NRF24L01-PA-LNA-with-Antenna-2-4GHz-Wireless-Transceiver-for-Arduino-/262457830537?hash=item3d1bb4ac89:g:FPgAAOSwuzRXeHP6

 

Noe ala denne, men fikk ikke testet det noe skikkelig ut. Fikk wifi kontrolleren først ^^

[stuntteam]

RFLink Gateway versjon 45 lansert!

•  
•  
•  
•  
•  

R45 Changelog:
- New Device: Silvercrest switch set IAN276299 
- New Device: Silvercrest switch set IAN113854 
- New Device: Silvercrest switch set IAN91210 
- New Device: Quigg switch set GT-9000 (Tevion/Globaltronics/ALDI) 
- New Device: Unitec switch set 4811 model 50028 (Intertek) 
- New Device: Cotech switch set 36-6361 
- New Device: Sartano switch set, Model 50028, HN 10047 
- New Device: Electro Depot switch set, article code 940557 
- New Device: BL999 weather sensor 
- New Device: Digi-Tech 4-LD14554 Outdoor temperature sensor (Thanks: PJA) 
- New Device: PLC-T4022G X10 RF to Powerline 
- New Device: X10 UR76 E Remote Control 
- New Device: Konig Alarm system sensors 
- New Device: Alecto 1200 alternative protocol version 
- New Device: Oregon EW99 
- New Device: Smartwares RM174RF Smoke detector 
- New Device: FirstLine FWS802 Pool Thermometer (Thanks: BC) 
- New Device: Liwin Shutters / Blinds controller 
- Fixed: MiniGPIO command structure 
- Fixed: Conrad RSL pair command added 
- Fixed: Warema EWFS (Thanks: SH) 
- Fixed: Removed Ningbo debug message 
- Fixed: Mebus protocol detection for Auriol Z29536 IAN55982 
- Fixed: Removed debug messages on Atlantic protocol 
- Fixed: Milight color and brightness changing on groups 
- Fixed: DKW2012 Humidity conversion 
- Fixed: DKW2012 Wind speed conversion (Thanks: HJ) 
- Fixed: Xiron ID sometimes had an incorrect bit 
- Fixed: Blyss/Avidsen transmit 
- Fixed: Aster protocol split on/off and dim/bright into separate devices 
- Fixed: Improved detection of WH5029 
- Fixed: Improved HE800 protocol detection 
- Fixed: Improved detection of Cleverwatts, Kerui and compatible devices 
- Fixed: Proper handling of incoming serial commands for KAKU and related devices 
- Fixed: Improved Chacon EMW200 detection 
- Added: RTS protocol option to swap ON/OFF command 
- Added: RTS long TX option to extend the RTS transmit time 
- Added: "Settings reset" feature 
- Added: Extended Gaposa protocol 
- Added: Lacrosse V3 protocol support for negative temperature values 

Available on www.nemcon.nl/blog2
Enjoy!

Endret 11. desember 2016 av stuntteam

[Hr Kotelett]

Versjon 46 lansert

 

R46: (10/03/2017)
- New Device: Applidom DM82 motion sensor
- New Device: OWL Intuition PV / CM180i
- New Device: WH2A temperature sensors
- New Device: WH1285 TX (WH-5) Temp & Humidity sensor
- New Device: ABB lightswitch type 3299a-11900 (a.k.a. TX Tango) (Receive only!)
- New Device: Velleman VM130T Motor control
- New Device: HRC 101 Motor control
- New Device: AC512-02 AC to RF projection screen trigger
- New Device: 2 new Dooya protocol flavors
- New Device: D-YA / Diya Motor control
- New Device: Konx doorbell model 602 (Receive only!)
- New Device: Doorman doorbell (Receive only!)
- New Device: Acurite 3in1 3N1TXR / 3N1TXC (Thanks: JR)
- New Device: Byron BY532E (Receive only!)
- New Device: Stagnoli remotes
- New Device: Blyss temperature sensors (Ref.630467) (Thanks: JD)
- New Device: Grundig QH-831A 2010525 & Quhwa QH-831A doorbell
- New Device: 868mhz: Woonveilig security sensors
- New Device: 868mhz: Egardia security sensors
- New Device: 868mhz: Alecto WS3900
- New Device: Yale HSA3000/6000 alarm system sensors
- New Device: Sartano 50080 (Harald Nyborg 2794) switch set
- New Device: Astrell 85 portal motorization system
- New Device: Philips AJ7010/12
- New Feature: Learn RF device signals that use a standard EV1527/PT2262 protocol
- Fixed: Some small eeprom handling issues
- Fixed: Improved AI protocol priority handling
- Fixed: various CC2500 issues, make sure pin 6 is wired to ground to use CC2500!
- Fixed: Tightened Warema EWFS detection
- Fixed: RTSlongTX command
- Fixed: ON/OFF vs UP/DOWN command handling
- Fixed: UPM Esic extended packet detection and increased sanity checks on data
- Fixed: Optimized Novatys timing
- Fixed: AlectoV3 Humidity value validation
- Fixed: FineOffset vs Alecto improved differentiation, Note: device ID's have changed for WS1100
- Fixed: Alecto WS-1100 humidity
- Fixed: AlectoV4 Some packets contained an invalid temperature
- Fixed: Globaltronics GT-WT-02 negative temperature/channel number mixup
- Fixed: Globaltronics GT-WT-02 now always reporting a humidity
- Fixed: Tristate send, removed debug message and fixed a timing bug
- Fixed: WS7000 rain reporting
- Fixed: Added additional Brel protocol variant
- Fixed: LightwaveRF turned MOOD commands into regular switch commands so any home automation software can use them
- Fixed: Improved Friedland doorbell signal detection
- Fixed: Acurite 5in1 corrected wind speed, wind direction and rainfall values (Thanks: Xztraz.)
- Fixed: Improved AcuRite 00592TXR detection
- Fixed: Tunex zero humidity value
- Fixed: Improved Home Confort transmit routine and added up/down support (Thanks: Geert)
- Fixed: Battery detection in Prologue protocol
- Fixed: Added channel number to device ID for THGR810
- Fixed: Added channel number support to Warema devices
- Fixed: Improved UPM ESIC protocol detection
- Fixed: Improved SA33 detection
- Fixed: Gaposa protocol timing
- Added: battery status on various Alecto/Maplin devices (Thanks: Ad)
- Added: Hardware & Software configuration via i/o pins:
pin 6 to ground for: CC2500 enable
pin 7 to ground for: disable internal pull-up on RF data in
pin 12 to ground for: reset of EEPROM settings

[Hr Kotelett]

R47: (15/09/2017) 
- New Device: Micro Tybox X2D / Tybox H X2D Thermostats (works with 433 and/or 868 mhz) 
- New Device: Tybox 310 X2D Thermostat (868mhz) 
- New Device: Delta Dore - Deltia 8.03 X2D Thermostat (868mhz) 
- New Device: TYXIA 261/461 X2D micro modules (868mhz) (Receive only, more logs needed) 
- New Device: Milight RGB+CCT (a.o. 4-zone FUT092/ 8-zone FUT089) 
- New Device: Milight RGB (a.o. FUT098) 
- New Device: Bofu motor BF-301, EY1612, EY1624 and others 
- New Device: Oregon Scientific SL109 
- New Device: AR53002 / AR50055 X2D Thermostats 
- New Device: Atlantic MD-210R / Focus MD-210R - 868mhz door contact 
- New Device: Legrand CAD Radio 
- New Device: Gelia EMW100T switch set 
- New Device: ELEC EDB-40 / QH-1085TX V1.1 Quhwa doorbell 
- New Device: X10 Sensors 
- New Device: Ambient FT004T temperature sensor 
- New Device: Ambient FT004B temperature sensor 
- New Device: ASA radio technology Go-1 
- New Device: Telis 4 Modulis RTS 
- New Device: Added support for a new version of the Rubicson WT0122 pool thermometer 
- New Device: Renkforce E0190TA and compatible temperature sensors 
- New Device: Ematronic AC114-01B shutter/blinds controller 
- New Device: Yooda Melody shutter/blinds controller 
- New Device: Viking 02813 Temperature sensor 
- New Device: Marquant 943134 Temperature sensor 
- New Device: Arlec RC10 switch set 
- New Device: V2 Phoenix remote signals (Receive only) 
- New Device: IDK CAR-200 doorbell (Receive only) 
- New Feature: GPIO pin state at boot can be selected with a wire from pin 5 to ground to set the pin default to high 
- Added: X2D/X3D protocol support 
- Added: Milight RGB and RGB+CCT protocol support 
- Added: Direct dimming support for Flamingo and compatible devices 
- Added: Additional WH3 detection 
- Added: Two Additional Dooya protocol flavors 
- Added: Additional Dooya signal recognition 
- Added: Additional Blyss remote control recognition 
- Added: Additional Brell remote control recognition 
- Added: STOP command support to (first) extended RTS protocol version 
- Added: Support for second extended RTS protocol version 
- Added: Additional Pair option for Bofu motor devices 
- Added: upon request added 6 additional GPIO pin's for generic use 
The GPIO pins are often used to 'press buttons' on incompatible devices 
- Fixed: Added pairing command for Ansluta 
- Fixed: Increased transmission duration for Ansluta 
- Fixed: corrected barometric pressure value of BTHR918 
- Fixed: UPM Esic negative temperatures 
- Fixed: Further improved X10 protocol detection 
- Fixed: 'newkaku' send command handling improved 
- Fixed: 'newkaku' group commands put at a unique switch number 
- Fixed: imrpoved newkaku filtering 
- Fixed: improved Acurite SL109 negative temperature handling 
- Fixed: CM113 ampere precision 
- Fixed: Milight: bug in unit selection 
- Fixed: bug with the number of RFCustom records 
- Fixed: removal of RFCustom records 
- Fixed: Improved Xiron sensor detection 
- Fixed: Alecto rain meter values